Dell Force10 S55T FTOS Command Line Reference Guide for the S55 System FTOS 8. - Page 43

Example Command Output example: show bootvar Force10#show bootvar PRIMARY IMAGE FILE = ftp://box:[email protected]//home/5.3.1/5.3.1.0/FTOS-ED-RPM1-5.3.1.0.bin SECONDARY IMAGE FILE = variable does not exist DEFAULT IMAGE FILE = flash://FTOS-ED-5.3.1.0.bin LOCAL CONFIG FILE = variable does not exist PRIMARY HOST CONFIG FILE = variable does not exist SECONDARY HOST CONFIG FILE = variable does not exist PRIMARY NETWORK CONFIG FILE = variable does not exist SECONDARY NETWORK CONFIG FILE = variable does not exist CURRENT IMAGE FILE = ftp://box:[email protected]//home/5.3.1/5.3.1.0/FTOS-ED-RPM1-5.3.1.0.bin CURRENT CONFIG FILE 1 = flash://startup-config CURRENT CONFIG FILE 2 = variable does not exist CONFIG LOAD PREFERENCE = local first BOOT INTERFACE GATEWAY IP ADDRESS = variable does not exist Force10# Related Commands boot config boot host boot network boot system (S55) boot system gateway Set the location of configuration files on local devices. Set the location of configuration files from the remote host. Set the location of configuration files from a remote network. Set the location of FTOS image files. Specify the IP address of the default next-hop gateway for the management subnet. show file ces Display contents of a text file in the local filesystem. Syntax show file filesystem Parameters filesystem Enter one of the following: • flash: for the internal Flash • slot0: for the external Flash Command Modes EXEC Privilege Command History Version 8.3.5.0 Introduced on the S55. Version 7.6.1.0 Introduced on S-Series Version 7.5.1.0 Introduced on C-Series E-Series original Command File Management | 43