Dell Force10 S55T FTOS Command Line Reference Guide for the S55 System FTOS 8. - Page 29
boot system S55 - s55 switch
View all Dell Force10 S55T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
primary secondary file-url After entering rpm0 or rpm1, enter the keyword primary to configure the boot parameters used in the first attempt to boot FTOS. After entering rpm0 or rpm1, enter the keyword secondary to configure boot parameters used if the primary operating system boot selection is not available. To boot from a file: • on the internal Flash, enter flash:// followed by the filename. • on an FTP server, enter ftp://user:password@hostip/filepath • on the external Flash, enter slot0:// followed by the filename. • on a TFTP server, enter tftp://hostip/filepath Defaults Not configured. Command Modes CONFIGURATION Command History Version 7.5.1.0 Introduced on C-Series E-Series original Command Usage To display these changes in the show bootvar command output, you must save the running Information configuration to the startup configuration (using the copy command) and reload system. Related Commands change bootflash-image boot system gateway Change the primary, secondary, or default boot image configuration. Specify the IP address of the default next-hop gateway for the management subnet. boot system (S55) Tell the system where to access the FTOS image used to boot the system. Syntax boot system {gateway ip address| stack-unit [0-11 | all] [default | primary {system {A: | B:} | tftp: | | secondary]} To return to the default boot sequence, use the no boot system command. Parameters gateway stack-unit ip-address 0-11, all default primary secondary tftp: A: | B: Enter the IP address of the default next-hop gateway for the management subnet Enter the stack-unit number for the master switch. Enter an IP address in dotted decimal format. Stack-unit number Enter the default keyword to use the primary FTOS image. Enter the primary keyword to use the primary FTOS image. Enter the secondary keyword to use the primary FTOS image. Enter TFTP: to retrieve the image from a TFTP server. tftp://hostip/filepath Enter A: or B: to boot one of the system partitions. Defaults Not configured. File Management | 29