Dell Force10 S55T FTOS Command Line Reference Guide for the S55 System FTOS 8. - Page 98
show debugging, Command Example, on the E-Series
View all Dell Force10 S55T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 98 highlights
www.dell.com | support.dell.com E-Series Example Figure 4-12. Command Example: show cpu-traffic-stats on the E-Series Force10#show cpu-traffic-stats Processor : CP Received 100% traffic on GigabitEthernet 8/2 LLC:0, SNAP:0, IP:100, ARP:0, other:0 Unicast:100, Multicast:0, Broadcast:0 Total packets:100 Processor : RP1 Received 62% traffic on GigabitEthernet 8/2 LLC:0, SNAP:0, IP:500, ARP:0, other:0 Unicast:500, Multicast:0, Broadcast:0 Total packets:500 Received 37% traffic on GigabitEthernet 8/1 LLC:0, SNAP:0, IP:300, ARP:0, other:0 Unicast:300, Multicast:0, Broadcast:0 Total packets:300 Processor : RP2 No CPU traffic statistics. Force10# Usage Information Traffic statistics are sorted on a per-interface basis; the interface receiving the most traffic is displayed first. All CPU and port information is displayed unless a specific port or CPU is specified. Traffic information is displayed for router ports only; not for management interfaces. The traffic statistics are collected only after the debug cpu-traffic-stats command is executed; not from the system bootup. Note: After debugging is complete, use the no debug cpu-traffic-stats command to shut off traffic statistics collection. Related Commands debug cpu-traffic-stats Enable CPU traffic statistics for debugging show debugging c e s View a list of all enabled debugging processes. Syntax show debugging Command Mode EXEC Privilege Command History Version 8.3.5.0 Introduced on the S55. Version 8.1.1.0 Introduced on E-Series ExaScale Version 7.6.1.0 Introduced on S-Series Version 7.5.1.0 Introduced on C-Series E-Series original Command 98 | Control and Monitoring