Dell Force10 S55T FTOS Command Line Reference Guide for the S55 System FTOS 8. - Page 234

www.dell.com | support.dell.com ip prefix-list c e s Enter the PREFIX-LIST mode and configure a prefix list. Syntax ip prefix-list prefix-name To delete a prefix list, use the no ip prefix-list prefix-name command. Parameters prefix-name Enter a string up to 16 characters long as the name of the prefix list, up to 140 characters long. Command Modes CONFIGURATION Command History Version 8.3.5.0 Version 8.1.1.0 Version 7.8.1.0 Version 7.6.1.0 Version 7.5.1.0 pre-Version 6.1.1.0 Introduced on the S55. Introduced on E-Series ExaScale Increased name string to accept up to 140 characters. Prior to 7.8.1.0, names are up to 16 characters long. Support added for S-Series Support added for C-Series Introduced for E-Series Usage Information Prefix lists redistribute OSPF and RIP routes meeting specific criteria. For related RIP commands supported on C-Series and E-Series, see Chapter 33, Router Information Protocol (RIP). For related OSPF commands supported on all three platforms, see Chapter 26, Open Shortest Path First (OSPFv2 and OSPFv3). Prior to 7.8.1.0, names are up to 16 characters long. Related Commands show ip route list show ip prefix-list summary Display IP routes in an IP prefix list. Display a summary of the configured prefix lists. permit c e s Configure a filter that passes packets meeting the criteria specified. Syntax permit ip-prefix [ge min-prefix-length] [le max-prefix-length] To delete a forward filter, use the no permit ip-prefix command. Parameters ip-prefix ge min-prefix-length le max-prefix-length Specify an IP prefix in the network/length format. For example, 35.0.0.0/8 means match the first 8 bits of address 35.0.0.0. (OPTIONAL) Enter the keyword ge followed by the minimum prefix length, which is a number from zero (0) to 32. (OPTIONAL) Enter the keyword le followed by the maximum prefix length, which is a number from zero (0) to 32. Command Modes PREFIX-LIST 234 | Access Control Lists (ACL)