Dell Force10 S55T FTOS Command Line Reference Guide for the S55 System FTOS 8. - Page 693

25 Neighbor Discovery Protocol (NDP) Overview Neighbor Discovery Protocol for IPv6 is defined in RFC 2461 as part of the Stateless Address Autoconfiguration protocol. It replaces the Address Resolution Protocol used with IPv4. It defines mechanisms for solving the following problems: • Router discovery: Hosts can locate routers residing on a link. • Prefix discovery: Hosts can discover address prefixes for the link. • Parameter discovery • Address autoconfiguration - configuration of addresses for an interface • Address resolution - mapping from IP address to link-layer address • Next-hop determination • Neighbor Unreachability Detection (NUD): Determine that a neighbor is no longer reachable on the link. • Duplicate Address Detection (DAD): Allow a node to check whether a proposed address is already in use. • Redirect: The router can inform a node about a better first-hop. NDP makes use of the following five ICMPv6 packet types in its implementation: • Router Solicitation • Router Advertisement • Neighbor Solicitation • Neighbor Advertisement • Redirect Commands The Neighbor Discovery Protocol (NDP) commands in this chapter are: • clear ipv6 neighbors • ipv6 nd managed-config-flag • ipv6 nd max-ra-interval • ipv6 nd mtu • ipv6 nd other-config-flag • ipv6 nd prefix • ipv6 nd ra-lifetime • ipv6 nd reachable-time • ipv6 nd suppress-ra Neighbor Discovery Protocol (NDP) | 693