Dell Force10 S55T FTOS Command Line Reference Guide for the S55 System FTOS 8. - Page 973
show sflow
View all Dell Force10 S55T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 973 highlights
Usage Information Related Commands This command changes the sampling rate for an Interface. By default, the sampling rate of an interface is set to the same value as the current global default sampling rate. If the value entered is not a correct power of 2, the command generates an error message with the previous and next power-of-2 value. Select one of these two number and re-enter the command. sflow sample-rate (Global) Change the sampling rate globally. show sflow c e s Display the current sFlow configuration Syntax show sflow [interface] Parameters interface (OPTIONAL) Enter the following keywords and slot/port or number information: • For an 100/1000 Ethernet interface, enter the keyword GigabitEthernet followed by the slot/port information. • For a 1-Gigabit Ethernet interface, enter the keyword GigabitEthernet followed by the slot/port information. • For a Loopback interface, enter the keyword loopback followed by a number from 0 to 16383. • For a SONET interface, enter the keyword sonet followed by the slot/port information. • For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet followed by the slot/port information. Command Modes EXEC EXEC Privilege Command History Version 8.3.5.0 Version 8.2.1.0 Version 8.1.1.0 Version 7.7.1.0 Version 7.6.1.0 Version 6.2.1.1 Introduced on S55 Introduces on S-Series Stacking Introduced on E-Series ExaScale Introduced on S-Series Introduced on C-Series Introduced on E-Series Example Figure 38-2. show sflow Command Example Force10#show sflow sFlow services are enabled Global default sampling rate: 32768 Global default counter polling interval: 20 1 collectors configured Collector IP addr: 133.33.33.53, Agent IP addr: 133.33.33.116, UDP port: 6343 0 UDP packets exported 0 UDP packets dropped 165 sFlow samples collected 0 sFlow samples dropped due to sub-sampling This count is always zero (0) Linecard 1 Port set 0 H/W sampling rate 8192 Gi 1/16: configured rate 8192, actual rate 8192, sub-sampling rate 1 Gi 1/17: configured rate 16384, actual rate 16384, sub-sampling rate 2 Linecard 3 Port set 1 H/W sampling rate 16384 Gi 3/40: configured rate 16384, actual rate 16384, sub-sampling rate 1 Force10# sFlow | 973