Dell Force10 MXL Blade MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 117

Usage Information The order option is relevant in the context of the Policy QoS feature only. The following applies: • The seq sequence-number is applicable only in an ACL group. • The order option works across ACL groups that have been applied on an interface via QoS policy framework. • The order option takes precedence over the seq sequence-number. • If sequence-number is not configured, then rules with the same order value are ordered according to their configuration order. • If the sequence-number is configured, then the sequence-number is used as a tie breaker for rules with the same order. If the sequence-number is configured, then the sequence-number is used as a tie breaker for rules with the same order. Related Commands deny permit Configures a filter to drop packets. Configures a filter to forward packets. Common MAC Access List Commands The following commands are available within both MAC ACL modes (Standard and Extended) and do not have mode-specific options. The MXL 10/40GbE Switch IO Module platform supports both ingress and egress MAC ACLs. The following commands allow you to clear, display and assign MAC ACL configurations. • clear counters mac access-group • mac access-group • show mac access-lists • show mac accounting access-list clear counters mac access-group Clear counters for all or a specific MAC ACL. Syntax clear counters mac access-group [mac-list-name] Parameters mac-list-name (OPTIONAL) Enter the name of a configured MAC access list. Command Modes EXEC Privilege Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Access Control Lists (ACL) | 117