Dell Force10 MXL Blade MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 565
ssh Command Example, Usage, Information, Related, Commands, Syntax, Parameters
View all Dell Force10 MXL Blade manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 565 highlights
Usage This command displays the contents of the file flash:/ADMIN_DIR/ssh/authorized-keys.username. Information Related Commands ip ssh rsa-authentication (Config) Configures the RSA authorized keys. ssh Open an SSH connection specifying the hostname, username, port number and version of the SSH client. FTOS supports both inbound and outbound SSH sessions using IPv4 addressing. Inbound SSH supports accessing the system through the management interface as well as through a physical Layer 3 interface. Syntax ssh {hostname | ipv4 address} [-l username | -p port-number | -v {1 | 2}] Parameters hostname ipv4 address -l username -p port-number -v {1 | 2} (OPTIONAL) Enter the IP address or the hostname of the remote device. (OPTIONAL) Enter the IP address in dotted decimal format A.B.C.D. (OPTIONAL) Enter the keyword -l followed by the user name used in this SSH session. Default: The user name of the user associated with the terminal. (OPTIONAL) Enter the keyword -p followed by the port number. Range: 1 to 65536 Default: 22 (OPTIONAL) Enter the keyword -v followed by the SSH version 1 or 2. Default: The version from the protocol negotiation Defaults As above. Command Modes EXEC Privilege Command History Example Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Figure 29-13. ssh Command Example FTOS#ssh 123.12.1.123 -l ashwani -p 5005 -v 2 Security | 565