Dell Force10 MXL Blade MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 233

ip igmp snooping querier Enable IGMP querier processing for the VLAN interface. Syntax ip igmp snooping querier To disable IGMP querier processing for the VLAN interface, enter no ip igmp snooping querier command. Defaults Not configured Command Modes INTERFACE VLAN - (conf-if-vl-n) Command History Usage Information Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module This command enables the IGMP switch to send General Queries periodically. This is useful when there is no multicast router present in the VLAN because the multicast traffic does not need to be routed. An IP address must be assigned to the VLAN interface for the switch to act as a querier for this VLAN. show ip igmp snooping mrouter Display multicast router interfaces. Syntax show ip igmp snooping mrouter [vlan number] Parameters vlan number Enter the keyword vlan followed by the vlan number. Range: 1 to 4094 Command Modes EXEC EXEC Privilege Command History Example Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Figure 13-1. show ip igmp snooping mrouter Command Example FTOS#show ip igmp snooping mrouter Interface Router Ports Vlan 2 Te 13/3, Po 1 FTOS# Related Commands show ip igmp groups Use this IGMP command to view groups. Internet Group Management Protocol (IGMP) | 233