Dell Force10 MXL Blade MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 338
mac-address-table aging-time, mac-address-table static
View all Dell Force10 MXL Blade manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 338 highlights
www.dell.com | support.dell.com interface interface vlan vlan-id Command Modes EXEC Privilege Command History Version 8.3.16.1 Enter the following keywords and slot/port or number information: • For a Port Channel interface, enter the keyword port-channel followed by a number: Range: 1 to 128 • For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet followed by the slot/port information. • For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE followed by the slot/port information. Enter the keyword vlan followed by a VLAN ID number from 1 to 4094. Introduced on MXL 10/40GbE Switch IO Module mac-address-table aging-time Specify an aging time for MAC addresses to be removed from the MAC Address Table. Syntax mac-address-table aging-time seconds Parameters seconds Enter either zero (0) or a number as the number of seconds before MAC addresses are relearned. To disable aging of the MAC address table, enter 0. Range: 10 - 1000000 Default: 1800 seconds Defaults 1800 seconds Command Modes CONFIGURATION Command History Related Commands Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module mac learning-limit show mac-address-table aging-time Sets the MAC address learning limits for a selected interface. Displays the MAC aging time. mac-address-table static Associate specific MAC or hardware addresses to an interface and VLANs. Syntax mac-address-table static mac-address output interface vlan vlan-id To remove a MAC address, use the no mac-address-table static mac-address output interface vlan vlan-id command. 338 | Layer 2