Dell Force10 MXL Blade MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 331

17 Link Aggregation Control Protocol (LACP) Overview This chapter contains commands for Dell Force10's implementation of the link aggregation control protocol (LACP) for the creation of dynamic link aggregation groups (LAGs - called port-channels in FTOS parlance). For static LAG commands, refer to the section Port Channel Commands in the Interfaces chapter), based on the standards specified in the IEEE 802.3 Carrier sense multiple access with collision detection (CSMA/CD) access method and physical layer specifications. Commands Use the following commands for LACP: • clear lacp counters • debug lacp • lacp long-timeout • lacp port-priority • lacp system-priority • port-channel mode • port-channel-protocol lacp • show lacp clear lacp counters Clear Port Channel counters. Syntax clear lacp port-channel-number counters Parameters port-channel-number Enter a port-channel number: Range: 1 to 128 Defaults Command Modes Without a Port Channel specified, the command clears all Port Channel counters. EXEC EXEC Privilege Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Link Aggregation Control Protocol (LACP) | 331