Dell Force10 MXL Blade MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 188

www.dell.com | support.dell.com clear ip dhcp Reset DHCP counters. Syntax clear ip dhcp [binding {address} | conflict | server statistics] Parameters binding address conflict server statistics Enter this keyword to delete all entries in the binding table. Enter the IP address to clear the binding entry for a single IP address. Enter this keyword to delete all of the log entries created for IP address conflicts. Enter this keyword to clear all the server counter information. Command Mode EXEC Privilege Default Command History Usage Information none Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Entering after clear ip dhcp binding, clears all the IPs from the binding table. debug ip dhcp server Display FTOS debugging messages for DHCP. Syntax debug ip dhcp server [events | packets] Parameters events packet Enter this keyword to display DHCP state changes. Enter this keyword to display packet transmission/reception. Command Mode Default EXEC Privilege none Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module default-router Assign a default gateway to clients based on address pool. Syntax Parameters default-router address [address2...address8] address Enter the a list of routers that may be the default gateway for clients on the subnet. You may specify up to 8. List them in order of preference. Command Mode DHCP 188 | Dynamic Host Configuration Protocol (DHCP)