Dell Force10 MXL Blade MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 449
Per-VLAN Spanning Tree Plus (PVST+), Overview, Commands
View all Dell Force10 MXL Blade manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 449 highlights
24 Per-VLAN Spanning Tree Plus (PVST+) Overview The FTOS implementation of PVST+ (Per-VLAN Spanning Tree plus) is based on the IEEE 802.1d standard Spanning Tree Protocol, but it creates a separate spanning tree for each VLAN configured. Commands The FTOS PVST+ commands are: • disable • description • edge-port bpdufilter default • protocol spanning-tree pvst • show spanning-tree pvst • spanning-tree pvst • spanning-tree pvst err-disable • tc-flush-standard • vlan bridge-priority • vlan forward-delay • vlan hello-time • vlan max-age Note: For easier command line entry, the plus (+) sign is not used at the command line. disable Disable PVST+ globally. Syntax disable To enable PVST+, enter no disable. Defaults Command Modes Command History PVST+ is disabled CONFIGURATION (conf-pvst) Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Per-VLAN Spanning Tree Plus (PVST+) | 449