Dell Force10 MXL Blade MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 191

lease Specify a lease time for the addresses in a pool. Syntax lease {days [hours] [minutes] | infinite} Parameters days hours minutes infinite Enter the number of days of the lease. Range: 0-31 Enter the number of hours of the lease. Range: 0-23 Enter the number of minutes of the lease. Range: 0-59 Specify that the lease never expires. Command Mode Default DHCP 24 hours Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module netbios-name-server Specify the NetBIOS windows internet naming service (WINS) name servers, in order of preference, that are available to Microsoft dynamic host configuration protocol (DHCP) clients. Syntax netbios-name-server address [address2...address8] Parameters address Enter the address of the NETBIOS name server. You may enter up to 8, in order of preference. Command Mode DHCP Default none Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module netbios-node-type Specify the NetBIOS node type for a Microsoft DHCP client. Dell Force10 recommends specifying clients as hybrid. Syntax netbios-node-type type Dynamic Host Configuration Protocol (DHCP) | 191