Dell Force10 MXL Blade MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 347
Virtual LAN (VLAN) Commands
View all Dell Force10 MXL Blade manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 347 highlights
Virtual LAN (VLAN) Commands The following commands configure and monitor virtual local area networks (VLANs). VLANs are a virtual interface and use many of the same commands as physical interfaces. You can configure an IP address and Layer 3 protocols on a VLAN called Inter-VLAN routing. FTP, TFTP, ACLs, and SNMP are not supported on a VLAN. Occasionally, while sending broadcast traffic over multiple Layer 3 VLANs, the virtual router redundancy protocol (VRRP) state of a VLAN interface may continually switch between Master and Backup. • description • default vlan-id • default-vlan disable • name • show config • show vlan • tagged • track ip • untagged For more information, also refer to VLAN Stacking and VLAN-related commands, such as portmode hybrid, in Chapter 14, Interfaces. description Add a description about the selected VLAN. Syntax description description To remove the description from the VLAN, use the no description command. Parameters description Enter a text string description to identify the VLAN (80 characters maximum). Defaults none Command Modes INTERFACE VLAN Command History Related Commands Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module show vlan Displays VLAN configuration. Layer 2 | 347