Dell Force10 MXL Blade MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 265
show interfaces description
View all Dell Force10 MXL Blade manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 265 highlights
show interfaces description Display the descriptions configured on the interface. Syntax show interfaces [interface] description Parameters interface Enter one of the following keywords and slot/port or number information: • For Loopback interfaces, enter the keyword loopback followed by a number from 0 to 16383. • For the management interface on the stack unit enter the keyword ManagementEthernet followed by the slot/port information. The slot range is 0-0 and the port range is 0. • For the Null interface, enter the keywords null 0. • For a Port Channel interface, enter the keyword port-channel followed by a number: Range: 1-128. • For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet followed by the slot/port information. • For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE followed by the slot/ port information. • For VLAN interfaces, enter the keyword vlan followed by a number from 1 to 4094. Command Modes EXEC EXEC Privilege Command History Example Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Figure 14-33. show interfaces description Command Example FTOS#show interface description Interface OK Status Protocol TenGigabitEthernet 0/1 NO admin down down TenGigabitEthernet 0/2 NO admin down down TenGigabitEthernet 0/3 NO admin down down TenGigabitEthernet 0/4 NO admin down down TenGigabitEthernet 0/5 NO admin down down TenGigabitEthernet 0/6 NO admin down down TenGigabitEthernet 0/7 NO up down TenGigabitEthernet 0/8 YES up up TenGigabitEthernet 0/9 NO admin down down TenGigabitEthernet 0/10 NO admin down down TenGigabitEthernet 0/11 NO admin down down TenGigabitEthernet 0/12 NO admin down down TenGigabitEthernet 0/13 NO admin down down TenGigabitEthernet 0/14 NO admin down down TenGigabitEthernet 0/15 NO admin down down TenGigabitEthernet 0/16 YES up up TenGigabitEthernet 0/17 NO admin down down TenGigabitEthernet 0/18 NO admin down down TenGigabitEthernet 0/19 NO admin down down TenGigabitEthernet 0/20 NO admin down down TenGigabitEthernet 0/21 NO admin down down Description Table 14-6. show interfaces description Command Example Fields Field Interface OK? Status Description Displays type of interface and associated slot and port number. Indicates if the hardware is functioning properly. States whether the interface is enabled (up) or disabled (administratively down). Interfaces | 265