Dell Force10 MXL Blade MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 160
dcb-policy output stack-unit stack-ports all, dcb stack-unit all pfc-buffering pfc-port-count pfc-
View all Dell Force10 MXL Blade manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 160 highlights
www.dell.com | support.dell.com To remove an ETS output policy from an interface, enter the no dcb-policy output policy-name command. ETS is enabled by default with the default ETS configuration applied (all dot1p priorities in the same group with equal bandwidth allocation). Related Commands dcb-output Create a DCB output policy. dcb-policy output stack-unit stack-ports all Apply the specified DCB output policy on all ports of the switch stack or a single stacked switch. Syntax dcb-policy output stack-unit {all | stack-unit-id} stack-ports all dcb-output-policy-name To remove all DCB input policies applied to the stacked ports, use the no dcb-policy output stack-unit all command. To remove only the DCB input policies applied to the specified switch, use the no dcb-policy output stack-unit command. Parameters stack-unit-id dcb-output-policyname Enter the stack unit identification. Enter the policy name for the DCB output policy. Defaults none Command Modes CONFIGURATION Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Usage Information The dcb-policy output stack-unit all command overwrites any previous dcb-policy output stack-unit stack-unit-id configurations. Similarly, a dcb-policy output stack-unit stack-unit-id command overwrites any previous dcb-policy output stack-unit all configuration. You can apply a DCB output policy with ETS configuration to all stacked ports in a switch stack or an individual stacked switch. You can apply different DCB output policies to different stack units. Related Commands dcb-policy input stack-unit stack-ports all Apply the specified DCB input policy. dcb stack-unit all pfc-buffering pfc-port-count pfc-queues Configure the PFC buffer for all switches in the stack. Syntax dcb stack-unit all pfc-buffering pfc-port-count {1-56} pfc-queues {1-2} To remove the configuration for the PFC buffer on all switches in the stack, use the no dcb stack-unit all pfc-buffering pfc-port-count pfc-queues command. 160 | Data Center Bridging