Dell Force10 MXL Blade MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 172
show dcb, show interface dcbx detail
View all Dell Force10 MXL Blade manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 172 highlights
www.dell.com | support.dell.com show dcb Displays the data center bridging status, the number of PFC-enabled ports, and the number of PFC-enabled queues. Syntax show dcb [stack-unit unit-number] Parameters unit number Enter the DCB unit number. The valid values are 0 to 5. Command Mode EXEC PRIVILEGE Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Example Figure 9-1. show dcb Command Example FTOS# show dcb stack-unit 0 port-set 0 DCB Status : Enabled PFC Port Count : 56 (current), 56 (configured) PFC Queue Count : 2 (current), 2 (configured) Usage Specify a stack-unit number on the Master switch in a stack. Information show interface dcbx detail Displays the DCBX configuration on an interface. Syntax show interface port-type slot/port dcbx detail Parameters port-type slot/port Enter the port type. Enter the slot/port number. Command Mode CONFIGURATION Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module 172 | Data Center Bridging