Dell Force10 MXL Blade MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 349
show config, show vlan
View all Dell Force10 MXL Blade manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 349 highlights
Defaults Not configured. Command Modes INTERFACE VLAN Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Usage To display information about a named VLAN, enter the show vlan command with the name parameter Information or the show interfaces description command. Related Commands description interface vlan show vlan Assigns a descriptive text string to the interface. Configures a VLAN. Displays the current VLAN configurations on the switch. show config Display the current configuration of the selected VLAN. Syntax show config Command Modes INTERFACE VLAN Example Figure 18-5. show config Command Example for a Selected VLAN FTOS(conf-if-vl-100)#show config ! interface Vlan 1 description a no ip address mtu 2500 shutdown FTOS(conf-if-vl-100)# Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module show vlan Display the current VLAN configurations on the switch. Syntax show vlan [brief | id vlan-id | name vlan-name] Parameters brief (OPTIONAL) Enter the keyword brief to display the following information: • VLAN ID • VLAN name (left blank if none is configured.) • Spanning Tree Group ID • MAC address aging time • IP address Layer 2 | 349