Dell Force10 MXL Blade MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 339
mac-address-table station-move refresh-arp, mac learning-limit
View all Dell Force10 MXL Blade manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 339 highlights
Parameters mac-address output interface vlan vlan-id Defaults Not configured. Command Modes CONFIGURATION Command History Version 8.3.16.1 Related Commands show mac-address-table Enter the 48-bit hexidecimal address in nn:nn:nn:nn:nn:nn format. Enter the keyword output followed by one of the following interfaces: • For a Port Channel interface, enter the keyword port-channel followed by a number: Range: 1 to 128 • For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet followed by the slot/port information. • For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE followed by the slot/port information. Enter the keyword vlan followed by a VLAN ID. Range:1 to 4094. Introduced on MXL 10/40GbE Switch IO Module Displays the MAC address table. mac-address-table station-move refresh-arp Ensure that ARP refreshes the egress interface when a station move occurs due to a topology change. Syntax [no] mac-address-table station-move refresh-arp Defaults none Command Modes CONFIGURATION Command History Usage Information Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module For details about using this command, refer to the "NIC Teaming" section of the Layer 2 chapter in the FTOS Configuration Guide. mac learning-limit Limit the maximum number of MAC addresses (static + dynamic) learned on a selected interface. Syntax Parameters mac learning-limit address_limit [dynamic] [no-station-move | station-move] [sticky] address_limit dynamic Enter the maximum number of MAC addresses that can be learned on the interface. Range: 1 to 1000000 (OPTIONAL) Enter the keyword dynamic to allow aging of MACs even though a learning limit is configured. Layer 2 | 339