Dell Force10 MXL Blade MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 395
distribute-list in, distribute-list out
View all Dell Force10 MXL Blade manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 395 highlights
distribute-list in Apply a filter to incoming routing updates from OSPF to the routing table. Syntax distribute-list prefix-list-name in [interface] To delete a filter, use the no distribute-list prefix-list-name in [interface] command. Parameters prefix-list-name interface Enter the name of a configured prefix list. (OPTIONAL) Enter one of the following keywords and slot/port or number information: • For Port Channel groups, enter the keyword port-channel followed by a number: Range: 1-128 • For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet followed by the slot/port information. • For a VLAN, enter the keyword vlan followed by a number from 1 to 4094. • For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE followed by the slot/port information. Defaults Not configured. Command Modes ROUTER OSPF Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module distribute-list out Apply a filter to restrict certain routes destined for the local routing table after the SPF calculation. Syntax distribute-list prefix-list-name out [connected | rip | static] To remove a filter, use the no distribute-list prefix-list-name out [connected | rip | static] command. Parameters prefix-list-name connected rip static Enter the name of a configured prefix list. (OPTIONAL) Enter the keyword connected to specify that connected routes are distributed. (OPTIONAL) Enter the keyword rip to specify that RIP routes are distributed.* (OPTIONAL) Enter the keyword static to specify that only manually configured routes are distributed. Defaults Not configured. Command Modes ROUTER OSPF Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Open Shortest Path First (OSPFv2) | 395