Dell Force10 MXL Blade MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 318

www.dell.com | support.dell.com Example Figure 15-20. show ip route summary Command Example FTOS>show ip route summary Route Source Active Routes Non-active Routes connected 17 0 static 3 0 ospf 100 1368 2 Intra-area: 762 Inter-area: 1 External-1: 600 External-2: 5 Total 1388 2 Total 1388 active route(s) using 222440 bytes Total 2 non-active route(s) using 128 bytes FTOS> Table 15-10. show ip route summary Column Headings Column Heading Description Route Source Active Routes Non-active Routes ospf 100 Total 1388 active... Identifies how the route is configured in FTOS. Identifies the best route if a route is learned from two protocol sources. Identifies the back-up routes when a route is learned by two different protocols. If the best route or active route goes down, the non-active route will become the best route. If routing protocols (OSPF, RIP) are configured and routes are advertised, then information on those routes is displayed. Displays the number of active and non-active routes and the memory usage of those routes. If there are no routes configured in the FTOS, this line does not appear. Related Commands show ip route Displays information about the routes found in switch. show ip traffic View IP, ICMP, UDP, TCP, and ARP traffic statistics. Syntax show ip traffic Command Modes EXEC Privilege Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module 318 | IPv4 Routing