Dell Force10 MXL Blade MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 459
vlan forward-delay, vlan hello-time
View all Dell Force10 MXL Blade manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 459 highlights
vlan forward-delay Set the amount of time the interface waits in the Listening State and the Learning State before transitioning to the Forwarding State. Syntax vlan forward-delay seconds To return to the default setting, enter no vlan forward-delay command. Parameters vlan vlan-range forward-delay seconds Enter the keyword vlan followed by the VLAN number(s). Range: 1 to 4094 Enter the keyword forward-delay followed by the time interval, in seconds, that FTOS waits before transitioning PVST+ to the forwarding state. Range: 4 to 30 seconds Default: 15 seconds Defaults 15 seconds Command Modes CONFIGURATION (conf-pvst) Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Related Commands vlan bridge-priority vlan hello-time vlan max-age show spanning-tree pvst Set the bridge-priority value Change the time interval between BPDUs Change the time interval before PVST+ refreshes Display the PVST+ configuration vlan hello-time Set the time interval between generation of PVST+ 7Bridge Protocol Data Units (BPDUs). Syntax vlan hello-time seconds To return to the default value, enter no vlan hello-time command. Parameters vlan vlan-range hello-time seconds Enter the keyword vlan followed by the VLAN number(s). Range: 1 to 4094 Enter the keyword hello-time followed by the time interval, in seconds, between transmission of BPDUs. Range: 1 to 10 seconds Default: 2 seconds Defaults Command Modes 2 seconds CONFIGURATION (conf-pvst) Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Per-VLAN Spanning Tree Plus (PVST+) | 459