Dell Force10 MXL Blade MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 237
clear dampening, cx4-cable-length, clear counters Command Example
View all Dell Force10 MXL Blade manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 237 highlights
Example Figure 14-1. clear counters Command Example FTOS#clear counters Clear counters on all interfaces [confirm] Related Commands mac learning-limit show interfaces Limit the maximum number of MAC addresses (static + dynamic) learned on a selected interface. Display information on a specific physical interface or virtual interface. clear dampening Clear the dampening counters on all the interfaces or just the specified interface. Syntax clear dampening [interface] Parameters interface (OPTIONAL) Enter one of the following keywords and slot/port or number information: • For a Port Channel interface, enter the keyword port-channel followed by a number. Range: 1 to 128. • For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet followed by the slot/port information. • For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE followed by the slot/port information. Defaults Without a specific interface specified, the command clears all interface dampening counters Command Modes EXEC Privilege Command History Usage Information Example Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module On the MXL Switch, after you enter the clear counters command and verify the results with the show interfaces command, the line rate is not reset to 0.00%. Figure 14-2. clear dampening Command Example FTOS#clear dampening tengigabitethernet 1/2 Clear dampening counters on tengig 1/2 [confirm] y FTOS# Related Commands show interfaces dampening dampening Displays interface dampening information. Configures dampening on an interface. cx4-cable-length Configure the length of the cable to be connected to the selected CX4 port. Syntax [no] cx4-cable-length {long | medium | short} Interfaces | 237