Dell Force10 MXL Blade MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 412

www.dell.com | support.dell.com Table 21-4. show ip ospf database asbr-summary Command Description Item Link State ID Advertising Router Checksum Length Network Mask TOS Metric Description Displays the Link State ID. Identifies the advertising router's ID. Displays the Fletcher checksum of the an LSA's complete contents. Displays the length in bytes of the LSA. Displays the network mask implemented on the area. Displays the Type of Service (TOS) options. Option 0 is the only option. Displays the LSA metric. Related Commands show ip ospf database Displays OSPF database information. show ip ospf database external Display information on the AS external (type 5) LSAs. Syntax show ip ospf process-id database external [link-state-id] [adv-router ip-address] Parameters process-id link-state-id adv-router ip-address Enter the OSPF Process ID to show a specific process. If no Process ID is entered, command applies only to the first OSPF process. (OPTIONAL) Specify LSA ID in dotted decimal format. The LSA ID value depends on the LSA type, and it can be one of the following: • the network's IP address for Type 3 LSAs or Type 5 LSAs • the router's OSPF router ID for Type 1 LSAs or Type 4 LSAs • the default destination (0.0.0.0) for Type 5 LSAs (OPTIONAL) Enter the keywords adv-router ip-address to display only the LSA information about that router. Command Modes EXEC EXEC Privilege Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module 412 | Open Shortest Path First (OSPFv2)