Dell Force10 MXL Blade MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 399
ip ospf dead-interval, ip ospf hello-interval
![]() |
View all Dell Force10 MXL Blade manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 399 highlights
ip ospf dead-interval Set the time interval since the last hello-packet was received from a router. After the interval elapses, the neighboring routers declare the router dead. Syntax ip ospf dead-interval seconds To return to the default values, use the no ip ospf dead-interval command. Parameters seconds Enter the number of seconds for the interval. Range: 1 to 65535. Default: 40 seconds. Defaults 40 seconds Command Modes INTERFACE Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Usage By default, the dead interval is four times the default hello-interval. Information Related Commands ip ospf hello-interval Sets the time interval between hello packets. ip ospf hello-interval Specify the time interval between the hello packets sent on the interface. Syntax ip ospf hello-interval seconds To return to the default value, use the no ip ospf hello-interval command. Parameters seconds Enter a the number of second as the delay between hello packets. Range: 1 to 65535. Default: 10 seconds. Defaults 10 seconds Command Modes INTERFACE Command History Usage Information Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module The time interval between hello packets must be the same for routers in a network. Related Commands ip ospf dead-interval Sets the time interval before a router is declared dead. Open Shortest Path First (OSPFv2) | 399
![](/manual_guide/products/dell-force10-mxl-blade-mxl-1040gbe-switch-io-module-ftos-command-line-reference-guide-80d1796/399.png)