Dell Force10 MXL Blade MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 504

www.dell.com | support.dell.com Example Figure 26-3. show ip rip database Command Example (Partial) FTOS#show ip rip database Total number of routes in RIP database: 1624 204.250.54.0/24 [50/1] via 192.14.1.3, 00:00:12, TenGigabitEthernet 9/15 204.250.54.0/24 auto-summary 203.250.49.0/24 [50/1] via 192.13.1.3, 00:00:12, TenGigabitEthernet 9/14 203.250.49.0/24 auto-summary 210.250.40.0/24 [50/2] via 1.1.18.2, 00:00:14, Vlan 18 [50/2] via 1.1.130.2, 00:00:12, Port-channel 30 210.250.40.0/24 auto-summary 207.250.53.0/24 [50/2] via 1.1.120.2, 00:00:55, Port-channel 20 [50/2] via 1.1.130.2, 00:00:12, Port-channel 30 [50/2] via 1.1.10.2, 00:00:18, Vlan 10 207.250.53.0/24 auto-summary 208.250.42.0/24 [50/2] via 1.1.120.2, 00:00:55, Port-channel 20 [50/2] via 1.1.130.2, 00:00:12, Port-channel 30 [50/2] via 1.1.10.2, 00:00:18, Vlan 10 208.250.42.0/24 auto-summary Table 26-1. show ip rip database Command Description Field Description Total number of routes in RIP database 100.10.10.0/24 directly connected 150.100.0.0 redistributed 209.9.16.0/24... Displays the number of RIP routes stored in the RIP database. Lists the route(s) directly connected. Lists the routes learned through redistribution. Lists the routes and the sources advertising those routes. show running-config rip Use this feature to display the current RIP configuration. Syntax show running-config rip Defaults none Command Modes EXEC Privilege Example Figure 26-4. show running-config rip Command Example show running-config rip ! router rip distribute-list Test1 in distribute-list Test21 out network 10.0.0.0 passive-interface TenGigabitEthernet 2/0 neighbor 20.20.20.20 redistribute ospf 999 version 2 Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module 504 | Routing Information Protocol (RIP)