Dell Force10 MXL Blade MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 190
Command, History, Syntax, Parameters, Command Mode, Default
View all Dell Force10 MXL Blade manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 190 highlights
www.dell.com | support.dell.com Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module excluded-address Prevent the server from leasing an address or range of addresses in the pool. Syntax excluded-address [address | low-address high-address] Parameters address low-address high-address Enter a single address to be excluded from the pool. Enter the lowest address in a range of addresses to be excluded from the pool. Enter the highest address in a range of addresses to be excluded from the pool. Command Mode DHCP Default Command History none Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module hardware-address For manual configurations, specify the client hardware address. Syntax hardware-address address Parameters address Enter the hardware address of the client. Command Mode Default DHCP none Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module host For manual (rather than automatic) configurations, assign a host to a single-address pool. Syntax host address Parameters address/mask Enter the host IP address and subnet mask. Command Mode Default DHCP none Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module 190 | Dynamic Host Configuration Protocol (DHCP)