Dell Force10 MXL Blade MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 452
protocol spanning-tree pvst, Configuring with protocol spanning-tree pvst Command
View all Dell Force10 MXL Blade manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 452 highlights
www.dell.com | support.dell.com protocol spanning-tree pvst Enter the PVST+ mode to enable PVST+ on a device. Syntax protocol spanning-tree pvst To disable PVST+, use the disable command. Defaults This command has no default value or behavior. Command Modes CONFIGURATION Command History Example Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Figure 24-2. Configuring with protocol spanning-tree pvst Command FTOS#conf FTOS(conf)#protocol spanning-tree pvst FTOS(conf-pvst)#no disable FTOS(conf-pvst)#vlan 2 bridge-priority 4096 FTOS(conf-pvst)#vlan 3 bridge-priority 16384 FTOS(conf-pvst)# FTOS(conf-pvst)#show config ! protocol spanning-tree pvst no disable vlan 2 bridge-priority 4096 vlan 3 bridge-priority 16384 FTOS# Usage Information Related Commands Once PVST+ is enabled, the device runs an STP instance for each VLAN it supports. disable show spanning-tree pvst Disable PVST+. Display the PVST+ configuration. show spanning-tree pvst View the Per-VLAN Spanning Tree configuration. Syntax show spanning-tree pvst [vlan vlan-id] [brief] [guard] Parameters vlan vlan-id brief (OPTIONAL) Enter the keyword vlan followed by the VLAN ID. Range: 1 to 4094 (OPTIONAL) Enter the keyword brief to view a synopsis of the PVST+ configuration information. 452 | Per-VLAN Spanning Tree Plus (PVST+)