Dell Force10 MXL Blade MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 181

Table 9-4. show interfaces pfc summary Command Example Fields (continued) Field Description Remote is enabled, Priority list Remote Willing Status is enabled Operational status (enabled or disabled) of peer device for DCBX exchange of PFC configuration with a list of the configured PFC priorities. Willing status of peer device for DCBX exchange (Willing bit received in PFC TLV): enabled or disabled. Local is enabled DCBX operational status (enabled or disabled) with a list of the configured PFC priorities. Operational status (local port) Port state for current operational PFC configuration: • Init: Local PFC configuration parameters were exchanged with the peer. • Recommend: Remote PFC configuration parameters were received from the peer. • Internally propagated: PFC configuration parameters were received from the configuration source. PFC DCBX Oper status Operational status for the exchange of the PFC configuration on the local port: match (up) or mismatch (down). State Machine Type Type of state machine used for DCBX exchanges of the PFC parameters: Feature - for legacy DCBX versions; Symmetric - for an IEEE version. TLV Tx Status Status of the PFC TLV advertisements: enabled or disabled. PFC Link Delay Link delay (in quanta) used to pause specified priority traffic. Application Priority TLV: Status of FCoE advertisements in application priority TLVs from the local DCBX FCOE TLV Tx Status port: enabled or disabled. Application Priority TLV: Status of ISCSI advertisements in application priority TLVs from the local DCBX SCSI TLV Tx Status port: enabled or disabled. Application Priority TLV: Priority bitmap used by the local DCBX port in FCoE advertisements in application Local FCOE Priority Map priority TLVs. Application Priority TLV: Priority bitmap used by the local DCBX port in ISCSI advertisements in application Local ISCSI Priority Map priority TLVs. Application Priority TLV: Status of FCoE advertisements in application priority TLVs from the remote peer Remote FCOE Priority port: enabled or disabled. Map Application Priority TLV: Status of iSCSI advertisements in application priority TLVs from the remote peer Remote ISCSI Priority port: enabled or disabled. Map PFC TLV Statistics: Input Number of PFC TLVs received. TLV pkts PFC TLV Statistics: Output TLV pkts Number of PFC TLVs transmitted. PFC TLV Statistics: Error Number of PFC error packets received. pkts PFC TLV Statistics: Pause Number of PFC pause frames transmitted. Tx pkts PFC TLV Statistics: Pause Number of PFC pause frames received. Rx pkts Data Center Bridging | 181