Dell Force10 MXL Blade MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 624
max-age, portfast bpdufilter default
View all Dell Force10 MXL Blade manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 624 highlights
www.dell.com | support.dell.com Parameters seconds Enter a number as the time interval between transmission of BPDUs. Range: 1 to 10. Default: 2 seconds. Defaults 2 seconds Command Modes SPANNING TREE Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Related Commands forward-delay max-age Changes the wait time before STP transitions to the Forwarding state. Changes the wait time before STP refreshes protocol configuration information. max-age Set the time interval for the spanning tree bridge to maintain configuration information before refreshing that information. Syntax max-age seconds To return to the default values, use the no max-age command. Parameters seconds Enter a number of seconds the FTOS waits before refreshing configuration information. Range: 6 to 40 Default: 20 seconds. Defaults 20 seconds Command Modes SPANNING TREE Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Related Commands forward-delay hello-time Changes the wait time before STP transitions to the Forwarding state. Changes the time interval between BPDUs. portfast bpdufilter default Enable BPDU Filter globally to filter transmission of BPDU on port fast enabled interfaces. Syntax portfast bpdufilter default To disable global bpdu filter default, use the no edge-port bpdufilter default command. Defaults Disabled Command Modes SPANNING TREE 624 | Spanning Tree Protocol (STP)