Dell Force10 MXL Blade MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 97

show ip accounting access-list Display the IP access-lists created on the switch and the sequence of filters. Syntax show ip accounting {access-list access-list-name | cam_count} interface interface Parameters access-list-name cam_count interface interface Enter the name of the ACL to be displayed. List the count of the CAM rules for this ACL. Enter the keyword interface followed by the interface type and slot/port or number information: • For a Port Channel interface, enter the keyword port-channel followed by a number: Range: 1-128 • For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet followed by the slot/port information. • For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE followed by the slot/port information. Command Modes Command History Example EXEC EXEC Privilege Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Figure 6-3. show ip accounting access-lists Command Example FTOS#show ip accounting access FILTER1 interface tengig 1/6 Extended IP access list FILTER1 seq 5 deny ip any 191.1.0.0 /16 count (0x00 packets) seq 10 deny ip any 191.2.0.0 /16 order 4 seq 15 deny ip any 191.3.0.0 /16 seq 20 deny ip any 191.4.0.0 /16 seq 25 deny ip any 191.5.0.0 /16 Table 6-1 defines the information in Figure 6-3. Table 6-1. show ip accounting access-lists Command Example Field Field "Extended IP..." "seq 5..." "order 4" Description Displays the name of the IP ACL. Displays the filter. If the keywords count or byte were configured in the filter, the number of packets or bytes processed by the filter is displayed at the end of the line. Displays the QoS order of priority for the ACL entry. Access Control Lists (ACL) | 97