Dell Force10 MXL Blade MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 95
access-class, clear counters ip access-group, ip access-group
View all Dell Force10 MXL Blade manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 95 highlights
The following commands allow you to clear, display, and assign IP ACL configurations. • access-class • clear counters ip access-group • ip access-group • show ip access-lists • show ip accounting access-list Note: See also Commands Common to all ACL Types. access-class Apply a standard ACL to a terminal line. Syntax access-class access-list-name Parameters access-list-name Enter the name of a configured Standard ACL, up to 140 characters. Defaults Command Modes Not configured. LINE Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module clear counters ip access-group Erase all counters maintained for access lists. Syntax clear counters ip access-group [access-list-name] Parameters access-list-name (OPTIONAL) Enter the name of a configured access-list, up to 140 characters. Command Modes EXEC Privilege Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module ip access-group Assign an IP access list (IP ACL) to an interface. Syntax ip access-group access-list-name {in | out} [implicit-permit] [vlan vlan-id] Parameters access-list-name in out Enter the name of a configured access list, up to 140 characters. Enter the keyword in to apply the ACL to incoming traffic. Enter the keyword out to apply the ACL to outgoing traffic. Access Control Lists (ACL) | 95