Dell Force10 MXL Blade MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 92
description, remark
View all Dell Force10 MXL Blade manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 92 highlights
www.dell.com | support.dell.com description Configure a short text string describing the ACL. Syntax description text Parameters text Enter a text string up to 80 characters long. Defaults Not enabled. Command Modes CONFIGURATION-IP ACCESS-LIST-STANDARD CONFIGURATION-IP ACCESS-LIST-EXTENDED CONFIGURATION-MAC ACCESS LIST-STANDARD CONFIGURATION-MAC ACCESS LIST-EXTENDED Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module remark Enter a description for an ACL entry. Syntax Parameters remark [remark-number] [description] remark-number description Enter the remark number. Note that you can use the same sequence number for the remark and an ACL rule. Range: 0 to 4294967290 Enter a description of up to 80 characters. Defaults Not configured Command Modes CONFIGURATION-IP ACCESS-LIST-STANDARD CONFIGURATION-IP ACCESS-LIST-EXTENDED CONFIGURATION-MAC ACCESS LIST-STANDARD CONFIGURATION-MAC ACCESS LIST-EXTENDED Command History Usage Information Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module The remark command is available in each ACL mode. You can configure up to 4294967290 remarks in a given ACL. The following example shows the use of the remark command twice within CONFIGURATION-IP ACCESS-LIST-STANDARD mode. Here, the same sequence number was used for the remark and for an associated ACL rule. The remark precedes the rule in the running-config because it is assumed that the remark is for the rule with the same sequence number, or the group of rules, that follow the remark. 92 | Access Control Lists (ACL)