Dell Force10 MXL Blade MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 419
show ip ospf database router
View all Dell Force10 MXL Blade manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 419 highlights
show ip ospf database router Display the router (type 1) LSA information. Syntax show ip ospf process-id database router [link-state-id] [adv-router ip-address] Parameters process-id link-state-id adv-router ip-address Enter the OSPF Process ID to show a specific process. If no Process ID is entered, command applies only to the first OSPF process. (OPTIONAL) Specify LSA ID in dotted decimal format. The LSA ID value depends on the LSA type, and it can be one of the following: • the network's IP address for Type 3 LSAs or Type 5 LSAs • the router's OSPF router ID for Type 1 LSAs or Type 4 LSAs • the default destination (0.0.0.0) for Type 5 LSAs (OPTIONAL) Enter the keywords adv-router ip-address to display only the LSA information about that router. Command Modes EXEC EXEC Privilege Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Open Shortest Path First (OSPFv2) | 419