Dell Force10 MXL Blade MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 641

Defaults Not configured. Command Modes CONFIGURATION Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Usage Information The number parameter in the ntp trusted-key command must be the same number as the number parameter in the ntp authentication-key command. If you change the ntp authentication-key command, you must also change the ntp trusted-key command. Related Commands ntp authentication-key ntp authenticate Sets an authentication key for NTP. Enables the NTP authentication parameters you set. ntp update-calendar Configure the FTOS to update the calendar (the hardware clock) with the NTP-derived time. Syntax ntp update-calendar [minutes] To return to default setting, use the no ntp update-calendar command. Parameters minutes (OPTIONAL) Enter the number of minutes between updates from NTP to the hardware clock. Range: 1 to 1440. Default: 60 minutes. Defaults Not enabled. Command Modes CONFIGURATION Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module show calendar Display the current date and time based on the switch hardware clock. Syntax show calendar Command Modes EXEC EXEC Privilege Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module System Time and Date | 641