Dell Force10 MXL Blade MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 96
show ip access-lists
View all Dell Force10 MXL Blade manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 96 highlights
www.dell.com | support.dell.com implicit-permit vlan vlan-id (OPTIONAL) Enter the keyword implicit-permit to change the default action of the ACL from implicit-deny to implicit-permit (that is, if the traffic does not match the filters in the ACL, the traffic is permitted instead of dropped). (OPTIONAL) Enter the keyword vlan followed by the ID numbers of the VLANs. Defaults Not enabled. Command Modes INTERFACE Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Usage Information You can assign one ACL (standard or extended ACL) to an interface. Note: This command is not supported on the MXL Switch loopback interfaces. Related Commands When you apply an ACL that filters IGMP traffic, all IGMP traffic is redirected to the CPUs and soft-forwarded, if required, in the following scenarios: • on a Layer 2 interface - if a Layer 3 ACL is applied to the interface. • on a Layer 3 port or on a Layer 2/Layer 3 port ip access-list standard ip access-list extended Configures a standard ACL. Configures an extended ACL. show ip access-lists Display all of the IP ACLs configured in the system, whether or not they are applied to an interface, and the count of matches/mismatches against each ACL entry displayed. Syntax show ip access-lists [access-list-name] [interface interface] [in] Parameters access-list-name interface interface in Enter the name of a configured MAC ACL, up to 140 characters. Enter the keyword interface followed by the one of the following keywords and slot/port or number information: • For a Port Channel interface, enter the keyword port-channel followed by a number: Range: 1 to 128 • For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet followed by the slot/port information. • For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE followed by the slot/port information. Identify whether ACL is applied on ingress side. Command Modes EXEC Privilege Command History \ Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module 96 | Access Control Lists (ACL)