Dell Force10 MXL Blade MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 497

Related Commands ip split-horizon Sets the RIP routing updates to exclude routing prefixes. ip rip receive version Set the interface to receive specific versions of RIP. The RIP version you set on the interface overrides the version command in ROUTER RIP mode. Syntax ip rip receive version [1] [2] To return to the default, use the no ip rip receive version command. Parameters 1 2 (OPTIONAL) Enter the number 1 for RIP version 1. (OPTIONAL) Enter the number 2 for RIP version 2. Defaults RIPv1 and RIPv2 Command Modes INTERFACE Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Usage Information If you want the interface to receive both versions of RIP, use ip rip receive version 1 2. Related Commands ip rip send version version Sets the RIP version to be used for sending RIP traffic on an interface. Sets the RIP version to be used for the switch software. ip rip send version Set the interface to send a specific version of RIP. The version you set on the interface overrides the version command in ROUTER RIP mode. Syntax ip rip send version [1] [2] To return to the default value, use the no ip rip send version command. Parameters 1 2 (OPTIONAL) Enter the number 1 for RIP version 1. The default is RIPv1. (OPTIONAL) Enter the number 2 for RIP version 2. Defaults RIPv1 Command Modes INTERFACE Command History Usage Information Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module To enable the interface to send both version of RIP packets, use ip rip send version 1 2. Routing Information Protocol (RIP) | 497