Dell Force10 MXL Blade MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 293
clear ip fib stack-unit, clear ip route, clear tcp statistics
View all Dell Force10 MXL Blade manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 293 highlights
clear ip fib stack-unit Clear all forwarding information base (fib) entries in the specified stack unit (use this command with caution, refer to Usage Information). Syntax clear ip fib stack-unit unit-number Parameters unit-number Enter the stack-unit number. Range: 0 to 5 Command Mode EXEC EXEC Privilege Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Usage Information Use this command to clear Layer 3 CAM inconsistencies. Caution: Executing this command causes traffic disruption. Related Commands show ip fib stack-unit Shows the FIB entries. clear ip route Clear one or all routes in the routing table. Syntax clear ip route {* | ip-address mask} Parameters * ip-address mask Enter an asterisk (*) to clear all learned IP routes. Enter a specific IP address and mask in dotted decimal format to clear that IP address from the routing table. Command Modes EXEC Privilege Command History Related Commands Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module ip route show ip route show ip route summary Assigns an IP route to the switch. Views the routing table. Views a summary of the routing table. clear tcp statistics Clear TCP counters. Syntax clear tcp statistics IPv4 Routing | 293