Dell Force10 MXL Blade MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 607
show storm-control unknown-unicast, storm-control broadcast Configuration,
![]() |
View all Dell Force10 MXL Blade manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 607 highlights
Example Figure 32-2. show storm-control multicast Command Example FTOS#show storm-control multicast tengigabitethernet 1/0 Multicast storm control configuration Interface Direction Packets/Second TenGig 1/0 Ingress 5 FTOS# show storm-control unknown-unicast Display the storm control unknown-unicast configuration Syntax show storm-control unknown-unicast [interface] Parameters interface (OPTIONAL) Enter one of the following interfaces to display the interface specific storm control configuration. • For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet followed by the slot/port information. • For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE followed by the slot/ port information. Defaults none Command Modes EXEC EXEC Privilege Command History Example Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Figure 32-3. show storm-control unknown-unicast Command Example FTOS#show storm-control unknown-unicast tengigabitethernet 3/0 Unknown-unicast storm control configuration Interface Direction Packets/Second TenGig 3/0 Ingress 1000 FTOS# storm-control broadcast (Configuration) Configure the packets per second of broadcast traffic. Syntax storm-control broadcast [packets_per_second] in To disable broadcast rate-limiting, use the no storm-control broadcast [packets_per_second] in command. Storm Control | 607
![](/manual_guide/products/dell-force10-mxl-blade-mxl-1040gbe-switch-io-module-ftos-command-line-reference-guide-80d1796/607.png)