Dell Force10 MXL Blade MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 42

www.dell.com | support.dell.com configure Enter CONFIGURATION mode from EXEC Privilege mode. Syntax configure [terminal] Parameters terminal (OPTIONAL) Enter the keyword terminal to specify that you are configuring from the terminal. Command Modes EXEC Privilege Command History Example Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Figure 4-3. configure Command Example FTOS#configure FTOS(conf)# debug cpu-traffic-stats Enable the collection of CPU traffic statistics. Syntax debug cpu-traffic-stats Defaults Disabled Command Modes EXEC Privilege Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Usage Information This command enables (and disables) the collection of CPU traffic statistics from the time this command is executed (not from system boot). However, excessive traffic received by a CPU automatically triggers (turns on) the collection of CPU traffic statistics. Use the show cpu-traffic-stats to view the traffic statistics. If excessive traffic is received by CPU, traffic is rate controlled Note: This command must be enabled before the show cpu-traffic-stats command displays traffic statistics. Dell Force10 recommends disabling debugging (no debug cpu-traffic-stats) after troubleshooting is complete. Related Commands show cpu-traffic-stats Displays the cpu traffic statistics 42 | Control and Monitoring