Dell Force10 MXL Blade MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 25

format flash Erase all existing files and reformat the filesystem in the internal flash memory. After the filesystem is formatted, files cannot be restored. Syntax format {flash: | usbflash:} Default flash memory Command Modes EXEC Privilege Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Usage Information You must include the colon (:) when entering this command. Caution: This command deletes all files, including the startup configuration file. So, after executing this command, consider saving the running config as the startup config (use the write memory command or the copy run start command). Related Commands copy show file show file-systems Copies the current configuration to either the startup-configuration file or the terminal. Displays the contents of a text file in the local filesystem. Displays information about the file systems on the system. logging coredump Enable coredump. Syntax logging coredump stack-unit all Command Modes CONFIGURATION Command History Usage Information Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module The Kernel core dump can be large and may take up to five to 30 minutes to upload. FTOS does not overwrite application core dumps so delete them as necessary to conserve space on the flash; if the flash is out of memory, the coredump is aborted. FTOS completes the coredump process and waits until the upload is complete before rebooting the system. Related Commands logging coredump server Designates a sever to upload kernel core-dumps. File Management | 25