Dell Force10 MXL Blade MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 214

www.dell.com | support.dell.com Table 11-4. show fip-snooping statistics Command Fields Description (continued) Field Description Number of FLOGI Accepts Number of FIP FLOGI accept frames received on the interface Number of FLOGI Rejects Number of FIP FLOGI reject frames received on the interface Number of FDISC Accepts Number of FIP FDISC accept frames received on the interface Number of FDISC Rejects Number of FIP FDISC reject frames received on the interface Number of FLOGO Accepts Number of FIP FLOGO accept frames received on the interface Number of FLOGO Rejects Number of FIP FLOGO reject frames received on the interface Number of CVLs Number of FIP clear virtual link frames received on the interface Number of FCF Discovery Timeouts Number of FCF discovery timeouts that occurred on the interface Number of VN Port Session Timeouts Number of VN port session timeouts that occurred on the interface Number of Session failures due to Number of session failures due to hardware configuration that Hardware Config occurred on the interface show fip-snooping system Display information on the status of FIP snooping on the switch (enabled or disabled), including the number of FCoE VLANs, FCFs, ENodes, and currently active sessions. Syntax show fip-snooping system Command Mode • EXEC • EXEC Privilege Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Example Figure 11-7. show fip-snooping system Command Example FTOS# show fip-snooping system Global Mode : Enabled FCOE VLAN List (Operational) : 1, 100 FCFs : 1 Enodes : 2 Sessions : 17 214 | FIP Snooping