Dell Force10 MXL Blade MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 665

debug vrrp Allows you to enable debugging of VRRP. Syntax debug vrrp interface [vrrp-id] {all | packets | state | timer} To disable debugging, use the no debug vrrp interface [vrrp-id] {all | packets | state | timer} command. Parameters interface vrrp-id all bfd packets state timer Enter the following keywords and slot/port or number information: • For Port Channel interface types, enter the keyword port-channel followed by the number: Range: 1 to 128 • For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet followed by the slot/port information. • For a VLAN interface, enter the keyword vlan followed by the VLAN ID. The VLAN ID range is from 1 to 4094. (OPTIONAL) Enter a number from 1 to 255 as the VRRP group ID. Enter the keyword all to enable debugging of all VRRP groups. Enter the keyword bfd to enable debugging of all VFFP BFD interactions Enter the keyword packets to enable debugging of VRRP control packets. Enter the keyword state to enable debugging of VRRP state changes. Enter the keyword timer to enable debugging of the VRRP timer. Command Modes EXEC Privilege Command History Usage Information Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module If no options are specified, debug is active on all interfaces and all VRRP groups. description Configure a short text string describing the VRRP group. Syntax description text To delete a VRRP group description, use the no description command. Parameters text Enter a text string up to 80 characters long. Defaults Not enabled. Command Modes VRRP Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Virtual Router Redundancy Protocol (VRRP) | 665