Dell Force10 MXL Blade MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 650
show uplink-state-group, show running-config uplink-state-group Command Example, detail
View all Dell Force10 MXL Blade manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 650 highlights
www.dell.com | support.dell.com Command History Example Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Figure 36-2. show running-config uplink-state-group Command Example FTOS#show running-config uplink-state-group ! uplink-state-group 3 no enable description Testing UFD feature downstream disable links 2 downstream TenGigabitEthernet 0/1-2,5,9,11-12 upstream TenGigabitEthernet 0/3-4 Related Commands show uplink-state-group uplink-state-group Displays status information on a specified uplink-state group or all groups. Creates an uplink-state group and enable the tracking of upstream links. show uplink-state-group Display status information on a specified uplink-state group or all groups. Syntax show uplink-state-group [group-id] [detail] Parameters group-id detail Displays status information on a specified uplink-state group or all groups. Valid group-id values are 1 to 16. Displays additional status information on the upstream and downstream interfaces in each group Defaults none Command Modes EXEC EXEC Privilege Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module 650 | Uplink Failure Detection (UFD)