Dell Force10 MXL Blade MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 622
debug spanning-tree, description
View all Dell Force10 MXL Blade manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 622 highlights
www.dell.com | support.dell.com Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module debug spanning-tree Enable debugging of the spanning tree protocol and view information on the protocol. Syntax debug spanning-tree {stp-id [all | bpdu | events | exceptions] | protocol} To disable debugging, use the no debug spanning-tree command. Parameters stp-id protocol all bpdu events Enter zero (0). The switch supports one Spanning Tree group with a group ID of 0. Enter the keyword for the type of STP to debug, either mstp, pvst, or rstp. (OPTIONAL) Enter the keyword all to debug all spanning tree operations. (OPTIONAL) Enter the keyword bpdu to debug Bridge Protocol Data Units. (OPTIONAL) Enter the keyword events to debug STP events. Command Modes EXEC Privilege Command History Usage Information Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module When you enable debug spanning-tree bpdu for multiple interfaces, the software only sends information on BPDUs for the last interface specified. Related Commands portfast bpdufilter default Enters SPANNING TREE mode on the switch. description Enter a description of the spanning tree. Syntax description {description} To remove the description from the Spanning Tree, use the no description {description} command. Parameters description Enter a description to identify the Spanning Tree (80 characters maximum). Defaults none Command Modes SPANNING TREE (The prompt is "conf-stp".) Command History Related Commands Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module portfast bpdufilter default Enters SPANNING TREE mode on the switch. 622 | Spanning Tree Protocol (STP)