Dell Force10 MXL Blade MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 535

Usage Information aaa authorization commands aaa authorization exec Sets the parameters that restrict (or permit) a user's access to EXEC and CONFIGURATION level commands Sets the parameters that restrict (or permit) a user's access to EXEC level commands. aaa authorization commands Set parameters that restrict (or permit) a user's access to EXEC and CONFIGURATION level commands Syntax aaa authorization commands level {name | default} {local || tacacs+ || none} To undo a configuration, use the no aaa authorization commands level {name | default} {local || tacacs+ || none} command. Parameters commands level name default local tacacs+ none Enter the keyword commands followed by the command privilege level for command level authorization. Define a name for the list of authorization methods. Define the default list of authorization methods. Use the authorization parameters on the system to perform authorization. Use the TACACS+ protocol to perform authorization. Enter this keyword to apply no authorization. Defaults none Command Modes CONFIGURATION Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module aaa authorization config-commands Set parameters that restrict (or permit) a user's access to EXEC level commands. Syntax aaa authorization config-commands To disable authorization checking for CONFIGURATION level commands, use the no aaa authorization config-commands command. Defaults Command Modes Enabled when you configure aaa authorization commands CONFIGURATION Command History Usage Information Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module By default, the aaa authorization commands command configures the system to check both EXEC level and CONFIGURATION level commands. To enable only EXEC-level command checking, use the no aaa authorization config-commands command. Security | 535