Dell Force10 MXL Blade MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 619

stack-unit renumber Change the stack member ID of any stack member or a stand-alone switch. Syntax Parameters stack-unit 0-5 renumber 0-5 0-5 The first instance of this value is the stack member unit identifier, from 0 to 5, of the switch that you want add to the stack. The second instance of this value is the desired new unit identifier number. Defaults none Command Modes EXEC Privilege Command History Usage Information Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module You can renumber any switch, including the management unit or a stand-alone unit. You cannot renumber a unit to a number of an active member in the stack. When executing this command on the Master, the stack reloads. When the members are renumbered, only that specific unit resets and comes up with the new unit number. Example Figure 33-6. stack-unit renumber Command Example FTOS#stack-unit 0 renumber 2 Renumbering master unit will reload the stack. Proceed to renumber [confirm yes/ no]: Related Commands reload redundancy disable-auto-reboot show system Reboots FTOS. Resets the designated stack member. Displays the current status of all stack members or a specific member. Stacking Commands | 619