Dell Force10 MXL Blade MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 139

set metric Configure a filter to assign a new metric to redistributed routes. Syntax set metric [+ | -] metric-value To delete a setting, use the no set metric command. Parameters + metric-value (OPTIONAL) Enter + to add a metric-value to the redistributed routes. (OPTIONAL) Enter - to subtract a metric-value from the redistributed routes. Enter a number as the new metric value. Range: zero (0) to 4294967295 Defaults Not configured Command Modes ROUTE-MAP Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Related Commands set automatic-tag set metric-type set tag Computes the tag value of the route. Specifies the route type assigned to redistributed routes. Specifies the tag assigned to redistributed routes. set metric-type Configure a filter to assign a new route type for routes redistributed to OSPF. Syntax Parameters set metric-type {internal | external | type-1 | type-2} internal external type-1 type-2 Enter the keyword internal to assign the Interior Gateway Protocol metric of the next hop as the route's BGP MULTI_EXIT_DES (MED) value. Enter the keyword external to assign the IS-IS external metric. Enter the keyword type-1 to assign the OSPF Type 1 metric. Enter the keyword type-2 to assign the OSPF Type 2 metric. Defaults Not configured. Command Modes ROUTE-MAP Command History Related Commands Version 8.3.16.1 set automatic-tag set metric set tag Introduced on MXL 10/40GbE Switch IO Module Computes the tag value of the route. Specifies the metric value assigned to redistributed routes. Specifies the tag assigned to redistributed routes. Access Control Lists (ACL) | 139