Dell Force10 MXL Blade MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 39

Example Figure 4-1. banner exec Command Example FTOS(conf)#banner exec ? LINE c banner-text(max length 255) c, where 'c' is a delimiting character FTOS(conf)#banner exec % Enter TEXT message. End with the character '%'. This is the banner% FTOS(conf)#end FTOS#exit 4d21h5m: %STKUNIT0-M P:CP %SEC-5-LOGOUT: Exec session is terminated for user on line console This is the banner Dell Force10 con0 now available Press RETURN to get started. This is the banner Related Commands banner login banner motd exec-banner line Sets a banner for login connections to the system. Sets a Message of the Day banner. Enables the display of a text string when the user enters EXEC mode. Enables and configures the console and virtual terminal lines to the system. banner login Set a banner to be displayed when logging on to the system. Syntax Parameters banner login {keyboard-interactive | no keyboard-interactive} [c line c] keyboard-interactive c line Enter this keyword to require a carriage return (CR) to get the message banner prompt. Enter a delineator character to specify the limits of the text banner. In Figure 4-2, the % character is the delineator character. Enter a text string for your text banner message ending the message with your delineator. In the example in Figure 4-2, the delineator is a percent character (%). Ranges: • maximum of 50 lines • up to 255 characters per line Defaults No banner is configured and the CR is required when creating a banner. Command Modes CONFIGURATION Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Usage A login banner message is displayed only in EXEC Privilege mode after entering the enable command Information followed by the password. These banners are not displayed to users in EXEC mode. Control and Monitoring | 39